How does the +10 dB function work on the 7060B, 7070A, 7071A, and 7073A?

If the LFE channel is aligned at the same level as the main channels then a loud explosion effect could easily overload the tape (or hard disk) recording machine. If this were the case then this would...

I already have some Genelec monitors, what else do I need to make a 5.1 system?

Use this table to select a subwoofer and surround speakers to add to your existing 2-channel stereo monitoring system:

Note:

Additional subwoofers of the same type may be required in larger room...

How does the LFE input and redirect function work on the 7060B, 7070A, 7071A, and 7073A?

It is a buffered, electronically balanced circuit that is parallel connected to the center channel input. 'Redirect' only works when the LFE channel bandwidth is set to 85 Hz and Redirect is turned ON...

How do I align the levels of a 5.1 system (using pink noise as a test signal)?

The main goal in the alignment of a 5.1 system is to achieve that the subwoofer sound output level (within the band limited subwoofer frequencies) is the same as the sound output level compared to the...