PROFESSIONAL MONITORING

Protel Int. Technologies, Auckland office
3 City Road, Cnr of City Road & Symonds Street,
Auckland
Mr. René Bullinga
T +64 9 379 8288
F +64 9 379 8290
E rene.bullinga@protel.co.nz
W www.protel.co.nz
Protel Int. Technologies, Wellington office
15 Walter Street, Wellington
Mr. Rob Paris
T +64 4 801 9494
F +64 4 384 2112
E rob.paris@protel.co.nz
W www.protel.co.nz

Genelec DSP Monitoring Systems

	The Genelec 8200 and 7200 loudspeaker systems have utilized DSP to allow for all standard AES/EBU formats of digital audio The 8200/7200 Series will accept sampling rates ranging from 32 kHz to 192 kHz The 8200 Series will also accept traditional analog signals and perform with all the features and benefits of Genelec 8000 Series products For more info -> 8200/7200 DSP Systems - Modes of operation For more info -> SE™ DSP System - Modes of operation

	AutoCal™ is an automated acoustical calibration tool for a single room multi loudspeaker system. A factory-calibrated Genelec measurement microphone is included Uses a calibrated Genelec measurement microphone (included) Correctly sets levels, distance compensating delays, phase (for subwoofers) and room response equalization SinglePoint™ and MultiPoint™ microphone locations for one, two or three-person mixing environments Interactive Response Editor provides visual readout of measured and corrected response curves as well as full manual editing of acoustic settings For more info -> Autocal™

	Genelec Loudspeaker Manager (GLM™) is a computer software that provides necessary control of all loudspeakers on the network Up to 25 loudspeakers and 5 subwoofers are definable and controllable via standard CAT5 cabling All functions and settings are stored in GLM System Setup Files or directly into each loudspeaker For more info -> Genelec Loudspeaker Manager features

	Genelec Loudspeaker Manager for Small Environments (GLM.SE™) is a computer software that provides complete control of the SE™ DSP Monitoring System Standard CAT5 cabling connects the host computer to the SE7261A DSP subwoofer and up to eight 8130A digital input monitors, connected to the subwoofer with standard AES/EBU cabling All functions and settings are stored in GLM.SE™ System Setup Files or directly into the SE7261A subwoofer For more info -> GLM for Small Environments™

> For further information:

Watch our DSP systems Video Tutorials which provide detailed insights into the benefits, setup and use of our DSP monitoring systems.

See also our Frequently Asked Questions on DSP systems

Genelec 8200 Series