Protel Int. Technologies, Auckland office
3 City Road, Cnr of City Road & Symonds Street,
Auckland
Mr. René Bullinga
T +64 9 379 8288
F +64 9 379 8290
E rene.bullinga@protel.co.nz
W www.protel.co.nz
Protel Int. Technologies, Wellington office
15 Walter Street, Wellington
Mr. Rob Paris
T +64 4 801 9494
F +64 4 384 2112
E rob.paris@protel.co.nz
W www.protel.co.nz
3 City Road, Cnr of City Road & Symonds Street,
Auckland
Mr. René Bullinga
T +64 9 379 8288
F +64 9 379 8290
E rene.bullinga@protel.co.nz
W www.protel.co.nz
Protel Int. Technologies, Wellington office
15 Walter Street, Wellington
Mr. Rob Paris
T +64 4 801 9494
F +64 4 384 2112
E rob.paris@protel.co.nz
W www.protel.co.nz
Genelec SE™ DSP System
featuring SE7261A subwoofer and 8130A's active monitors
Genelec SE™ DSP System supports three modes of operation:
- Stand Alone: This mode models Genelec 8000/7000 products with standard set of room response controls and sensitivity adjustments found on the connector panel DIP switches.
- GLM.SE™ Computer Assisted: Once the loudspeaker control network is connected and running, all DIP switches on the SE 7261A connector panel are ignored. All acoustic parameters of the loudspeakers through AutoCal™ or User Adjustment are controlled by GLM.SE™. This mode allows very flexible user defined setups to facilitate a wide variety of mixing requirements.
- Stand Alone Stored Settings: All acoustic parameters defined in GLM.SE™ software can be permanently stored in the SE7261A and the network then removed, providing users with the confidence of secure and consistent performance when a computer with GLM.SE™ software is not used.