8010 and 7040 Stereo System

By partnering your 8010s with a 7040 subwoofer, you’ll increase the headroom and SPL of your system. You’ll also get precise, clean low frequencies right down to 30 Hz, with seamless performance that just sounds ‘right’.


Products in this solution:

2 × 8010A Studio Monitor
1 × 7040A Studio Subwoofer

Products in this solution

8010A Studio Monitor

SPL

96 dB

Frequency Response

67 Hz - 25 kHz (-6dB)

Dimensions

H 195 x W 121 x D 115 mm, with Iso-Pod™ (view in inches)

7040A Studio Subwoofer

SPL

100 dB

Frequency Response

30 Hz - 90 Hz (-6dB)

Dimensions

H 410 x W 350 x D 205 mm, (view in inches)

Key Technologies

Active Crossovers

Room Response Compensation

Directivity Control Waveguide (DCW™) Technology

Intelligent Signal Sensing (ISS™) Technology

Iso-Pod™ Stand

Minimum Diffraction Enclosure (MDE™) Technology

Optimized Amplifiers

Protection Circuitry

Reflex Port Design

Versatile Mountings

Bass Management System

Laminar Spiral Enclosure (LSE™) Technology

Find Your Dealer

Type in your city to find your nearest Genelec dealer

Documentation

FAQ

The Classic 8000 Series monitors have an analogue input. The 7200 Series SAM subwoofers have AES/EBU digital outputs only. However, other 7300 Series SAM subwoofers have analogue inputs and outputs and can be used also with analogue monitors.

Which SAM™ Products You Are Going to Mix With the Classic 8000 Series?
Mixing 8000 Series and SAM™ monitors is not recommended

We do not recommend mixing Classic 8000 Series monitors with SAM™ Monitors.
If the analogue input sensitivity of 8000 Series and SAM™ Series monitors are the same, Genelec SAM™ Monitors exhibit a slightly larger latency (< 5 ms) than 8000 Series monitors. Therefore Classic 8000 Series and SAM™ Series monitors should not be mixed in a stereo pair or multichannel setup.

It is alright to mix Classic 8000 Series with SAM™ Subwoofers

However, it is okay to mix the Classic 8000 Series monitors with SAM™ Subwoofers. Any Classic 8000 Series monitors can be used with SAM™ Subwoofers, in any stereo or multichannel setup.