8010 Stereo Pair

For pro performance in a compact package, look no further. For small studio spaces and mobile recording, the 8010 is your genuinely truthful monitoring companion that will help spark your creativity too.


Products in this solution:

2 × 8010A Studio Monitor

Products in this solution

8010A Studio Monitor

SPL

96 dB

Frequency Response

67 Hz - 25 kHz (-6dB)

Dimensions

H 195 x W 121 x D 115 mm, with Iso-Pod™ (view in inches)

Key Technologies

Active Crossovers

Room Response Compensation

Directivity Control Waveguide (DCW™) Technology

Intelligent Signal Sensing (ISS™) Technology

Iso-Pod™ Stand

Minimum Diffraction Enclosure (MDE™) Technology

Optimized Amplifiers

Protection Circuitry

Reflex Port Design

Versatile Mountings

Genelec 8010A Studio Monitor Introduction Video


Find Your Dealer

Type in your city to find your nearest Genelec dealer

Documentation

FAQ

The Classic 8000 Series monitors have an analogue input. The 7200 Series SAM subwoofers have AES/EBU digital outputs only. However, other 7300 Series SAM subwoofers have analogue inputs and outputs and can be used also with analogue monitors.

Which SAM™ Products You Are Going to Mix With the Classic 8000 Series?
Mixing 8000 Series and SAM™ monitors is not recommended

We do not recommend mixing Classic 8000 Series monitors with SAM™ Monitors.
If the analogue input sensitivity of 8000 Series and SAM™ Series monitors are the same, Genelec SAM™ Monitors exhibit a slightly larger latency (< 5 ms) than 8000 Series monitors. Therefore Classic 8000 Series and SAM™ Series monitors should not be mixed in a stereo pair or multichannel setup.

It is alright to mix Classic 8000 Series with SAM™ Subwoofers

However, it is okay to mix the Classic 8000 Series monitors with SAM™ Subwoofers. Any Classic 8000 Series monitors can be used with SAM™ Subwoofers, in any stereo or multichannel setup.