When space is tight, the 4410A delivers the single cable networked convenience of Smart IP in a powerful, super-compact format.
4410A
Smart IP Installation Speaker

SPL
96 dB

Amplifier Power
18 W Bass (Class D) + 18 W Treble (Class D)

Frequency Response
67 Hz - 40 kHz (-6 dB)

Accuracy of Frequency Response
± 2.5 dB (74 Hz - 20 kHz)

Driver Dimensions
⌀ 76 mm Woofer + ⌀ 19 mm Tweeter (view in inches)

Dimensions
H 181 x W 121 x D 115 mm, (view in inches)

Weight
1.5 kg / 3.3 lb

Connections
1 x RJ45 AES67 / Dante Input
4410A Installation Speakers
Technical Specifications
When space is tight, the 4410A delivers the single cable networked convenience of Smart IP in a powerful, super-compact format.

System Specifications
Frequency Response
74 Hz - 20 kHz (± 2.5 dB)
Low cutoff -6dB
67 Hz
High cutoff -6dB
40 kHz

SPL
Peak SPL
≥100 dB
Maximum peak acoustic output per unit in a listening room with music material, at 1 m, using PoE+ power.
Short term max SPL
≥96 dB
Maximum short-term sine wave output on axis in half space, average 100 Hz to 3 kHz, at 1 m, using PoE+ power.
Long term max SPL
≥91 dB
Maximum long-term RMS acoustic output in same conditions with IEC-weighted noise, at 1 m using PoE+ power (limited by driver unit protection circuit and the PoE power supply being used).
Self-generated noise
Self-generated noise
≤5 dB
Self generated noise level in free field at 1 m on axis (A-weighted).
Weight
Weight1.5 kg (3.3 lb)
Dimensions
Height
181 mm
(7 1/8 in)
Width
121 mm
(4 3/4 in)
Depth
115 mm
(4 1/2 in)

Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
76 mm
(3 in)
Driver type
Metal dome
Diameter
19 mm
(3/4 in)
Directivity


Harmonic distortion
> 200 Hz ≤0.5 %
Amplifier Section
Amplifiers
18 W Class D
18 W Class D
Mains voltage
PoE+/PoE
Power consumption
ISS Active
≤3 W
Idle
≤4 W
Full output
30 W
Signal processing section
Connectors
Input
Ethernet (Power over Ethernet and Audio over IP)